manualshive.com logo in svg

Motorola WiNG 5.7.1, System Reference Manual

The Motorola WiNG 5.7.1 System Reference Manual is a comprehensive guide providing detailed instructions on operating and configuring the Motorola WiNG 5.7.1 system. Discover all the necessary information in this manual, available for free download at 88.208.23.73:8080, ensuring a seamless user experience for your Motorola WiNG 5.7.1 product.

Share
Download
background image

9 - 37

9.6 Setting the RADIUS Configuration

Services Configuration

Remote Authentication Dial-In User Service 

(RADIUS) is a client/server protocol and software enabling remote access servers 

to authenticate users and authorize their access to the access point managed network. RADIUS is a distributed client/server 
system that secures networks against unauthorized access. RADIUS clients send authentication requests to the access point’s 
RADIUS server containing user authentication and network service access information.

RADIUS enables centralized management of authentication data (usernames and passwords). When a client attempts to 
associate to a RADIUS supported access point, the access point sends the authentication request to the RADIUS server. The 
authentication and encryption of communications between the access point and server takes place through the use of a shared 
secret password (not transmitted over the network). 

The access point’s local RADIUS server stores the user database locally, and can optionally use a remote user database. It 
ensures higher accounting performance. It allows the configuration of multiple users, and assign policies for the group 
authorization.   

WiNG managed access points have an internal RADIUS server resource. However, AP6511 and AP6521 models do not have an 
onboard RADIUS server resource and an external resource must be used.

The access point allows the enforcement of user-based policies. User policies include dynamic VLAN assignment and access 
based on time of day. The access point uses a default trustpoint. A certificate is required for EAP TTLS,PEAP and TLS RADIUS 
authentication (configured with the RADIUS service).

Dynamic VLAN assignment is achieved based on the RADIUS server response. A user who associates to WLAN1 (mapped to 
VLAN1) can be assigned a different VLAN after authentication with the RADIUS server. This dynamic VLAN assignment 
overrides the WLAN's VLAN ID to which the user associates.

To view RADIUS configurations:

1. Select 

Configuration

 tab from the Web user interface.

2. Select 

Services

.

3. Select the 

RADIUS

 option. The RADIUS Group screen displays (by default). 

For information on creating the groups, user pools and server policies needed to validate user credentials against a server 
policy configuration, refer to the following:

•

Creating RADIUS Groups

•

Defining User Pools

•

Configuring the RADIUS Server

9.6.1 Creating RADIUS Groups

Setting the RADIUS Configuration

The access point’s RADIUS server allows the configuration of user groups with common user policies. User group names and 
associated users are stored in the access point’s local database. The user ID in the received access request is mapped to the 
associated wireless group for authentication. Group configurations allow the enforcement of the following policies controlling 
user access:

• The assignment of a VLAN to the user upon successful authentication

• The creation of a start and end of time in (HH:MM) when a user is allowed to authenticate

• The creation of a list of SSIDs to which a user belonging to this group is allowed to associate

• The ability to set the days of the week a user is allowed to login

• The ability to rate limit traffic

Summary of Contents for WiNG 5.7.1



































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for WiNG 5.7.1

Ubiquiti GigaBeam Quick Start Manual preview
GigaBeam
Brand: Ubiquiti Pages: 22
AirLive WL-1100AP How To Set Up preview
WL-1100AP
Brand: AirLive Pages: 2
Amped Wireless HIGHPOWER AC1200 User Manual preview
HIGHPOWER AC1200
Brand: Amped Wireless Pages: 106
Calix E3-48C Application Manual preview
E3-48C
Brand: Calix Pages: 225
LG ARND20BDAR2 Installation And Operation Manual preview
ARND20BDAR2
Brand: LG Pages: 56
LG LCB-003 Manual preview
LCB-003
Brand: LG Pages: 10
LG PWFMDD201 User Manual preview
PWFMDD201
Brand: LG Pages: 20
LG LCWB-001 User Manual preview
LCWB-001
Brand: LG Pages: 14
LG GoldStream LR3001 System Manual preview
GoldStream LR3001
Brand: LG Pages: 89
LG CR820 User Manual preview
CR820
Brand: LG Pages: 104
LG FM300 Service Manual preview
FM300
Brand: LG Pages: 128
LG WN8122E1 Manual preview
WN8122E1
Brand: LG Pages: 11
LG LG-D686 Quick Reference Manual preview
LG-D686
Brand: LG Pages: 365
T-Mobile tm-g5240 - T-mobile Hotspot Wireless User Manual preview
tm-g5240 - T-mobile Hotspot Wireless
Brand: T-Mobile Pages: 95
Air Live WLA-5000AP Quick Setup Manual preview
WLA-5000AP
Brand: Air Live Pages: 72
Franklin R850 Setup preview
R850
Brand: Franklin Pages: 6
Symmetricom GoWide 9.2 User Manual preview
GoWide 9.2
Brand: Symmetricom Pages: 134
ICP DAS USA WF-2051 Quick Start Manual preview
WF-2051
Brand: ICP DAS USA Pages: 8

Brands by name

Popular brands

Load more brands