5 - 36 WT4070/90 Wearable Terminal Integrator Guide
1.
Press
TAB
to highlight the
Profile Roaming
check box. Press
Blue
-
BKSP
to enable or disable the check box.
2.
Press
TAB
to highlight the
Enable IP Mgmt
check box. Press
Blue
-
BKSP
to enable or disable the check box.
3.
Press
TAB
to highlight the
Auto Time Config
check box. Press
Blue
-
BKSP
to enable or disable the check box.
4.
Press
TAB
to highlight
Save
and then press
ENTER
to save the settings or press
ESC
to discard any changes.
5.
Press
ESC
to exit the
Options
dialog box.
Change Password
Use
Change Password
to require a password before editing a profile. This allows pre-configuring profiles and
prevents users from changing the network settings. The user can use this feature to protect settings from a guest
user. By default, the password is not set.
Figure 5-47
Change Password Window
To create a password for the first time, enter the new password in the
New:
and
Confirm:
text boxes. Select
Save
.
The
Current:
text box does not appear if a password was not previously set.
To change an existing password, enter the current password in the
Current:
text box and enter the new password in
the
New:
and
Confirm:
text boxes. Select
Save
.
To delete the password, enter the current password in the
Current:
text box and leave the
New:
and
Confirm:
text
boxes empty. Select
Save
.
Table 5-26
System Options
Field
Description
Profile Roaming
Configures the wearable terminal to roam to the next available WLAN profile when it moves
out of range of the current WLAN profile.
Enable IP Mgmt
Enables the Wireless Companion Services to handle IP address management. The Wireless
Companion Service configures the IP based on what is configured in the network profile.
Deselect this to manually configure the IP in the standard Windows IP window. Enabled by
default.
Auto Time Config
Enables automatic update of the system time. Network association updates the device time
based on the time set in the AP. This proprietary feature is only supported with Zebra
infrastructure. Enabled by default.
NOTE
Passwords are case sensitive and can not exceed 160 characters.
Summary of Contents for WT4090
