2 Safety Instructions
12
Rev. 02/2018
2.3
Special Safety Instructions for the Device
Explosion hazard!
The following operations may only be executed providing the environment
is classified as non-explosive:
–
Establishing and terminating communications via PowerView3
interfaces and connections.
–
Inserting and removing SD cards.
Risk of destruction and injury!
The PowerView3 is an electrically operated device and there is the risk of
electrostatic discharges. Therefore, never operate the device without the
appropriate grounding, to prevent injuries and damage.
Risk of destruction!
It is possible to damage the ignition kit and engine through PowerView3
settings. Consequently, protect your device against unauthorized access.
–
Enable access control.
–
Log out after using the access level employed.
Risk of destruction!
When using the PowerView3, observe the following points:
–
Do not let the device fall.
–
The device must not come into contact with water and other liquids.
–
Do not operate the device in direct sunlight, near heat sources or in
humid environments.
–
Only operate the device according to the technical specifications.
Disregard of these guidelines can lead to the destruction of the device.
Summary of Contents for PoewerView3
