Manual #100-7100
10
Control Panel Features and Functions
A. Start
Button
Press the Start button to begin the service, (or
continue the service if paused.)
B. STOP
Button
To momentarily STOP the service, press the STOP
button. The “Running” light will blink indicating “pause”.
Use the STOP button to access the Training (S.T.O.P.)
mode. (Hold the STOP button down and then connect to the
vehicle
battery.)
C. Drain
Button
When pushed, will empty the on-board waste fluid
tank.
NOTE: Tank must be emptied after each service. The waste fluid
tank must be emptied before a new service can be started. Flashing
DRAIN TANK Light will indicate need to empty tank.
D. System
Lights
Illuminate during service indicating each procedure
running at the time.
E.
Low Battery Light
Illuminates below 12.0 volts.
F. Circuit
Breaker
The 10 amp circuit breaker protects the electronics.
G. Fluid
Tanks
Cleaner and Power Steering fluid tanks.
A
B
C
D
E
F
G
Summary of Contents for SteerClean-II 500-7100
