16
SENSORS
All Sensors for the television mounts utilize the same sensor. It can be used in the
Azimuth, Elevation or Skew motor assemblies.
NOTE:
1.
The
depth
of the sensor is common for all television motor assemblies.
2.
Use care in
handling
the sensor. Do not pry or put into a bind as breakage can occur.
The sensor is actually a glass bead encapsulated into plastic.
3.
When handling motors use care as the case can separate causing the motor gearbox
housing to
come apart
and prove to be unusable.
4.
Scotch Locks are
splicing
devices which will aid in sensor replacement when used
properly.
5.
Take care in locating the
proper wire
to splice. Do not mistake the motor wire for the
sensor wire. See Wiring Diagram
Depth into the gearbox assembly is
important. The lock nuts are in
place to keep the sensor at the proper
predetermined depth. A good rule of
thumb is 5 ½ threads from the end of
the sensor to the first nut.
5 ½ threads
Summary of Contents for Nomad SD2
Page 17: ...17...