Dx350_06d_oi_e.docx / Jul-20
page 31 / 67
Continuation „Mode Timer“:
INC / DEC MODE
When START/STOP is setting to period time measurement, the time measurement works always adding.
0 INCREMENT MODE
time measurement works adding
1 DECREMENT MODE time measurement works subtracting
TOTAL TIME MODE
Setting of the total timer (total time measurement).
When TOTAL TIME MODE is active, PRESELECTION serves as the preset value for the total timer.
Example:
For the total time measurement TOTAL TIME MODE has to be set to YES. The total time measurement runs parallel to
the normal time measurement. If the total time measurement should be automatically reset to O when 1:30 (H:M) is
reached, the reference source must be set e. g. to “SOURCE1”from the corresponding preselection menu to “TOTAL
TIMER”, the corresponding preset value e. g. “PRESELECTION 1” to “1:30” and the corresponding switching condition
“MODE1” to"RESULT> = PRES-> 0"
0 NO
No total time measurement
1 YES
Total time measurement activated
TOTAL TIME SET VALUE
With a reset/set command (command „SET TOTAL TIME“ via control input) the total timer (total time measurement) is
set to the value entered here. The parameter is only visible when TOTAL TIME MODE is active.
0
Smallest value (reset)
…
99999999
Highest value
