6
99.066
1
2
99.293/L
Defender®
N°2 Ø2
N°2 Ø2
Ø40
Ø40
N°2 Ø2
Ø40*
N°2 Ø2
Ø40*
99348ENG - XMODE / XMODE1 - MANUALE INSTALLATORE - REV. 01
2.2 - CYLINDER FIXING
For proper functioning of the lock, we
recommend installation of a MOTTURA
CHAMPIONS® double or half Europrofile
cylinder (according to application) (DO NOT
use cylinders with knobs).
For better protection of the cylinder from
the outer side of the door, we recommend
the use of MOTTURA DEFENDER® systems.
For these articles (not included in the pack),
please see MOTTURA catalogs. Alternatively
use European cylinder with the dimension
shown in the diagram.
OUTSIDE
plate
screw
2.3 – XMODE1 QUICK RELEASE VERSION
(CODE XTH...)
The lock bolts in the quick-release version are unlocked using
the handle. To correctly install such locks, fasten a blocking
plate on the outside face of the lock centring it over the
appropriate notch and securing it with the supplied M4
screw.
KEYBOARD VERSION
(ART. 99.685)
DISPLAY VERSION (ART. 99.688)
KE TRANSPONDER
VERSION (ART. 99.686)
TRANSPONDER VERSION
(ART. 99.687)
* 40 mm diameter hole to be drilled
only on the external panel. Cut a
36x20 mm opening on the plate if
the external panel has thickness
less than/equal to 6 mm; otherwise,
cut a 32x8 mm slot.
