manualshive.com logo in svg

MOTU PCI-424, User Manual

Looking for the User Manual for the MOTU PCI-424? Look no further! You can easily download the comprehensive manual for free from our website. Gain a thorough understanding of your product's features, setup, and troubleshooting tips. Visit 88.208.23.73:8080 and get your manual now!

Share
Download
background image

  A B O U T   T H E   P C I - 4 2 4   S Y S T E M

21

output each has its own independent sample rate 
converter for real-time conversion between any 
two sample rates between 40 and 100 kHz.

System word clock in and out

BNC ‘System’ Word clock connectors (in and out) 
are provided for synchronizing the HD192’s main 
system clock with other standard word clock 
devices.

AES word clock in

A BNC Word clock input connector is provided for 
independently synchronizing the AES/EBU output 
of the HD192 to a standard input clock.

Level Meters

The front panel of the HD192 I/O displays several 
banks of status LEDs.

On the right are two banks of meters for the twelve 
analog inputs and twelve analog outputs. For each 
channel, there is a 19-segment meter that measures 
from -42 dB to 0 dB, along with two red ‘over’ 
lights. The top LED remains illuminated after 
clipping occurs until it is cleared via software 
(either manually or via a configurable time-out 
period). The red LED below it only lights 
momentarily when clipping.

The 

Clock

 section on the left displays the current 

system clock setting (44.1, 48, 88.2, 96, 176.4, 192 
or 

no clock

), as well as the AES/EBU clock setting if 

sample rate conversion is taking place 
independently of the system clock.

16-BIT AND 24-BIT RECORDING

The PCI-424 system handles all data with a 24-bit 
signal path, regardless of the I/O format. Using 
AudioDesk™, the PCI-424 system’s Macintosh 
workstation software (included), you can record 
and play back 16-bit or 24-bit audio files at 44.1, 48, 
88.2 or 96 KHz via any of the system’s analog or 
digital inputs and outputs. The HD192 also offers 

recording at 176.4 or 192 kHz. On Windows, 24-bit 
audio files can be recorded with any compatible 
host application that supports 24-bit recording.

AUDIODESK

AudioDesk is a full-featured, 24-bit audio 
workstation software package for Macintosh 
included with each PCI-424 core system. 
AudioDesk provides multi-channel waveform 
editing, automated virtual mixing, graphic editing 
of ramp automation, real-time effects plug-ins with 
32-bit floating point processing, crossfades, 
support for many third-party audio plug-ins (in 
the MOTU Audio System and Adobe Premiere 
formats), background processing of file-based 
operations, sample-accurate editing and 
placement of audio, and more.

DIGITAL PERFORMER

The PCI-424 system is fully integrated with 
MOTU’s award-winning Digital Performer audio 
sequencer software package.

OTHER AUDIO SOFTWARE

The PCI-424 system ships with a standard WDM 
driver that allows you to record, edit, play back and 
mix your projects using your favorite WDM- and 
Wave-compatible Windows software.

The PCI-424 system also ships with standard Mac 
OS audio drivers.

The PCI-424 also includes a Macintosh and 
Windows ASIO driver for multi-channel 
compatibility with Steinberg Cubase and other 
ASIO-compatible software.

A COMPUTER-BASED SYSTEM

Regardless of what software you use with the 
PCI-424 system, the host computer determines the 
number of tracks the software can record and play 
simultaneously, as well as the amount of real-time 
effects processing you can apply to your mix. A 
faster computer with more RAM and faster hard 

Summary of Contents for PCI-424















































































































































































































































































Reviews:

No comments

Related manuals for PCI-424

Jamex 8220 User Manual preview
8220
Brand: Jamex Pages: 10
Kaya Instruments Komodo KY-FGK Hardware Reference And Installation Manual preview
Komodo KY-FGK
Brand: Kaya Instruments Pages: 27
One Stop Systems OSS-adaptPCI-PMC Quick Manual preview
OSS-adaptPCI-PMC
Brand: One Stop Systems Pages: 8
Lynx Studio Technology LynxTWO Installation And User Manual preview
LynxTWO
Brand: Lynx Studio Technology Pages: 36
Stanley RoamAlert Installation Manual preview
RoamAlert
Brand: Stanley Pages: 20
Quectel LTE-A&5G Series User Manual preview
LTE-A&5G Series
Brand: Quectel Pages: 39
FnL SRD7202P Quick Installation Manual preview
SRD7202P
Brand: FnL Pages: 6
ADLINK Technology PCIe-GIE7 Series Reference Manual preview
PCIe-GIE7 Series
Brand: ADLINK Technology Pages: 51
ADLINK Technology PCIe-2602 User Manual preview
PCIe-2602
Brand: ADLINK Technology Pages: 60
PRASTEL MEDIPROMF Installation Procedure preview
MEDIPROMF
Brand: PRASTEL Pages: 2
Shintaro SH-XCRUSB3 User Manual preview
SH-XCRUSB3
Brand: Shintaro Pages: 14
Spectrum M2i.3010 Hardware Manual preview
M2i.3010
Brand: Spectrum Pages: 165
Sonnet Echo ExpressCard Pro User Manual preview
Echo ExpressCard Pro
Brand: Sonnet Pages: 2
Sonnet Qio MR Professional User Manual preview
Qio MR Professional
Brand: Sonnet Pages: 14
Decision Computer International UHR-32 Manual preview
UHR-32
Brand: Decision Computer International Pages: 14
Diablotek UCR2302 Specifications preview
UCR2302
Brand: Diablotek Pages: 1
TECH FASS APS 400 User Manual preview
APS 400
Brand: TECH FASS Pages: 11
3Dlabs Wildcat VP User Manual preview
Wildcat VP
Brand: 3Dlabs Pages: 41

Brands by name

Popular brands

Load more brands