background image

  R E D U C I N G   M O N I T O R I N G   L A T E N C Y

109

Figure 12-4: Enabling CueMix DSP in AudioDesk or Digital Performer.

Once enabled, CueMix DSP monitoring is tied 
with Digital Performer or AudioDesk’s 

Audio Patch 

Thru 

feature: when you record-enable a track, the 

track’s input is routed directly to its output (via 
CueMix DSP in the PCI-424 hardware). This 
connection is made “under the hood”, which 
means that you won’t see it in CueMix Console. 
However, CueMix DSP connections made inside 
Digital Performer or AudioDesk will dovetail with 
any other mixes you’ve set up in CueMix Console. 
For example, if a record-enabled track is assigned 
to an output pair that is already being used in 
CueMix Console for an entirely separate mix bus, 
the track’s patched thru audio will simply be 
merged with the CueMix Console mix bus output.

Note to PCI-324 users who have upgraded to a 

PCI-424 system: notice that the 

Auto Cuemix 

Update

 check box has been removed as a result of 

the PCI-424’s more flexible and powerful CueMix 
DSP features. 

Auto CueMix Update

 is no longer 

needed because you enjoy the benefits of CueMix 
DSP patch thru, 

plus

 separate, independent mixing 

under CueMix Console, thanks to the much more 
powerful CueMix DSP engine.

Using CueMix with Sound Manager

To enable CueMix DSP for a host application that is 
using the MOTU PCI Sound Manager driver:

1

Make all of the Sound Manager preparations 

described in chapter 10, “Sound Manager” 
(page 97).

2

Choose the desired output for Sound Manager 

in the MOTU PCI Audio Console window, as 
explained in “Monitor Outputs” on page 69.

3

Open the Sound Control Panel, click the 

Input

 

tab, and check the 

Play sound through output device

 

option. Alternately, you can use the CueMix 
Console (described in chapter 13, “CueMix 
Console” (page 111)) to manually patch a live 
input to an output.

4

To control the overall level of the CueMix input, 

Use the CueMix Console.

Summary of Contents for PCI-424















































































































































































































































































Reviews: