manualshive.com logo in svg

MOTU PCI-424, User Manual

Looking for the User Manual for the MOTU PCI-424? Look no further! You can easily download the comprehensive manual for free from our website. Gain a thorough understanding of your product's features, setup, and troubleshooting tips. Visit 88.208.23.73:8080 and get your manual now!

Share
Download
background image

 

CHAPTER

 

  A B O U T   T H E   P C I E - 4 2 4   S Y S T E M

 

6

 

1

 

About the PCIe-424 System

 

OVERVIEW

 

The PCIe-424 core system is a computer-based hard disk 
recording system for Mac OS and Windows that offers 24 
simultaneous inputs and outputs per Audio Wire cable, 
expandable to 96 inputs/outputs. A core system consists of a 
PCI card connected to a standard 19-inch, single-space, 
rack-mountable audio interface.

The system includes AudioDesk™, full-featured audio 
workstation software for Mac OS that supports both 16-bit 
and 24-bit recording at any standard sample rate up to 192 
kHz.

For Windows, a WDM driver is included for compatibility 
with audio applications that support standard multi-channel 
WDM and Wave drivers.

Also included is an ASIO driver for multi-channel operation 
with Steinberg Cubase and other ASIO-compatible software.

The PCIe-424 card  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  6

The 2408mk3 interface  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  7

The 24I/O interface  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  8

The HD192 interface  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  8

16-bit and 24-bit recording. . . . . . . . . . . . . . . . . . . . . . . . . . .  9

AudioDesk . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  9

Digital Performer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  9

Other Audio Software  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  9

A computer-based system . . . . . . . . . . . . . . . . . . . . . . . . . . . .  9

THE PCIE-424 CARD

A PCIe-424 core system ships with a single PCI audio card 
called the PCIe-424. The card features a custom processor, a 
powerful DSP chip, four 6-pin Audio Wire connectors and 
an ADAT SYNC IN connector.

High definition audio

The PCIe-424 system can operate at the following high 
sample rates: 44.1, 48, 88.2, 96, 176.4 and 192 kHz. All 
MOTU PCIe-424 audio interfaces support rates up to 96 
kHz. In addition, the HD192 interface offers analog 
recording and playback at 176.4 or 192 kHz.

Audio Wire expansion

The PCIe-424 card provides four Audio Wire jacks, which 
are used to attach MOTU PCI audio interfaces to the card 
installed in the computer. Each Audio Wire is capable of 

transmitting 24 simultaneous channels of 96 kHz digital 
audio input and output or 12 simultaneous channels of 192 
kHz input and output.

Up to four MOTU PCI audio interfaces can be connected to 
a single PCIe-424 card for a maximum of 96 possible input 
and output connections. All MOTU PCI audio interfaces 
(including the 2408mk3, 24I/O and HD192) can also be 
“mixed and matched” on the PCIe-424 card, along with 
legacy interfaces, such as the 2408, 2408mII, 1296, 1224, 24i 
and 308.

Audio Wire carries a proprietary communication protocol 
between the card and the external I/O to handle the 
extremely low latencies required by the system. The heart of 
the PCIe-424 card is a custom-programmed VLSI chip 
capable of simultaneously processing all 96 inputs and 
outputs (192 channels total) at samples rates up to 96 KHz. 
At 176.4 or 192 kHz, this chip can process 48 simultaneous 
channels of input and output.

The custom chip handles all of the system’s I/O processing, 
freeing up the host computer’s processing bandwidth for 
real-time DSP effects and hard disk I/O.

CueMIx DSP

The PCIe-424 card features CueMix DSP™, a flexible 
DSP-driven mixing and monitoring matrix that provides the 
same near-zero monitoring latency as today’s latest digital 
mixers. CueMix DSP™ allows you to connect keyboards, 
synth modules, drum machines, and even effects processors 
and then monitor these live inputs with no audible delay and 
no processor drain on the host computer’s CPU. The CueMix 
DSP engine resides on the PCIe-424 card, so it works across 
all interfaces connected to the card. The included CueMix 
Console software provides an on-screen mixer that gives you 
hands-on control of your monitor mix, regardless of what 
audio software you prefer to use. Digital Performer users 
have the additional option of controlling CueMix DSP 
directly within Digital Performer’s mixing environment. 
CueMix DSP completely eliminates the buffer latency 
associated with monitoring on host-based recording 
systems.

Sample-accurate synchronization

The PCIe-424 card’s standard 9-pin ADAT SYNC IN 
connector provides sample-accurate synchronization with 
all ADATs or other ADAT Sync-compatible devices 
connected to the system. For example, if you digitally 

Summary of Contents for PCI-424















































































































































































































































































Reviews:

No comments

Related manuals for PCI-424

Assa Abloy HID iCLASS RWK400 Installation Manual preview
HID iCLASS RWK400
Brand: Assa Abloy Pages: 12
SanDisk SDDR-89-E15 Quick Start Manual preview
SDDR-89-E15
Brand: SanDisk Pages: 17
Vantec UGT-S100 User Manual preview
UGT-S100
Brand: Vantec Pages: 8
Nortel e-mobility 802.11b Wireless LAN DSSS PCI Card Installation Manual preview
e-mobility 802.11b Wireless LAN DSSS PCI Card
Brand: Nortel Pages: 18
Magtek cDynamo Quick Installation Manual preview
cDynamo
Brand: Magtek Pages: 2
COMPRO VISTA T100 - START UP GUIDE Manual preview
VISTA T100 - START UP GUIDE
Brand: COMPRO Pages: 32
Unigraf UCD-2 VX1 User Manual preview
UCD-2 VX1
Brand: Unigraf Pages: 23
Nordic ID AR82 User Manual preview
AR82
Brand: Nordic ID Pages: 20
Velleman K2604 Illustrated Assembly Manual preview
K2604
Brand: Velleman Pages: 8
Digitus DS-30222 Quick Installation Manual preview
DS-30222
Brand: Digitus Pages: 6
Digitus DN-10133 Manual preview
DN-10133
Brand: Digitus Pages: 2
Digitus DS-30040 User Manual preview
DS-30040
Brand: Digitus Pages: 6
G4S S874 Installation And User Instructions preview
S874
Brand: G4S Pages: 2
CommTech Fastcom 232/4-LPCI-335 Reference Manual preview
Fastcom 232/4-LPCI-335
Brand: CommTech Pages: 18
CommTech Fastcom G422/4-PCIe Hardware Reference Manual preview
Fastcom G422/4-PCIe
Brand: CommTech Pages: 19
Qualcomm ThinkPad T400s Notice preview
ThinkPad T400s
Brand: Qualcomm Pages: 4
JARLTECH 1288 SERIES Operation Manual preview
1288 SERIES
Brand: JARLTECH Pages: 24
IBM E1-700 Manual preview
E1-700
Brand: IBM Pages: 50

Brands by name

Popular brands

Load more brands