Motura Xmode F1.0, Operation And Maintenance Instructions

4

99286GB- XMODE – USER MANUAL - REV. 01

2 - ESCUTCHEONS

2.1 - INTERNAL ESCUTCHEON with KEYPAD  

The internal escutcheon has a keypad with 3 function keys and 4 LEDs (red-yellow-blue-green). 
The function keys are:
-

 up/down arrow: 

to select and confirm programming 

- 

E

 (Enter): to open/close lock in normal use.

The LEDs show lock status or execution of an operation by means of light signals identical to those of the exter-
nal escutcheon:
- 

RED 

LED 

flashing 

     lock 

closed

- RED LED steady on 

lock closing

- GREEN LED flashing 

    lock open

- GREEN LED steady on 

lock opening

- GREEN and RED LEDs steady on 

lock in programming phase

- YELLOW and BLUE LEDs 

programming signals

- All LEDs steady on for 2 seconds when “E” key is pressed   

internal security code active

Beeps signal to confirm when the lock has been opened or closed.
If the system is not used, it goes into stand-by after 5 seconds to save energy:
- lock active .......................... flash every second
- lock in stand-by .....…..…flash every 4 seconds

You can also use the keypad to check the type of power supply and, in case of battery 
power, check the charge level (see paragraph 8.1).  
Only with the door closed, press the up arrow + E keys simultaneously for 3 seconds.
The LEDs will signal as follows: 
- BLUE LED steady on ...............................................………….............………………… grid power
- GREEN LED steady on  ...........................................…….…………….power (batteries efficient)
- BLUE LED steady on + GREEN steady on ............................……............... grid + battery power
- YELLOW LED steady on + 3 beeps ................................................... reminder to replace batteries
- YELLOW LED steady on + double high-low sound............................................ batteries drained
The reminder to replace the batteries is given before any operation is done (opening/
closing, etc.). You should replace the batteries as soon as possible to ensure correct fun-
ctioning of the lock.

RED LED

GREEN LED

YELLOW LED

BLUE LED

2.2 - INTERNAL ESCUTCHEON with DISPLAY

The escutcheon includes the following components:
- a color display OLED, a matrix of 160 x 128 pixels, the size of 1.69 "
- a keyboard with five keys, four of which (arrow keys) are used to move menu entry and one (the "

E

" key) is used 

to confirm the choices you made earlier.

E

 (Enter): to open/close lock in normal use

- the LEDs show lock status or execution of an operation by means of light signals identical to those of the 

external escutcheon:

- RED LED flashing 

lock closed

- RED LED steady on 

lock closing

- GREEN LED flashing 

    lock open

- GREEN LED steady on 

lock opening

Beeps signal to confirm when the lock has been opened or closed.
If the system is not used, it goes into stand-by after 5 seconds to save energy:
- lock active .......................... flash every second
- lock in stand-by .....…..…flash every 4 seconds
To use the display escutcheon refer to the appropriate instruction manual supplied with the product.

RED LED

GREEN LED