background image

 

2

 
 
Dear Motus USA Customer, 

 
We would like to thank you for buying our studio sports training equipment ,hope 
that it affords you the desired satisfaction. Please note and follow the information 
and instructions for assembly and use. If you have any questions, please contact at 
any time. 
 

                  SAFETY INSTRUCTIONS                   

 
Before you start training on your sports training equipment, please read the 
instructions carefully. 
Be sure to keep the instructions and any other accompanying in case of repair and 
for spare parts delivery. 
 
 

z

 

Use only original parts as delivered. 

z

 

Check before the equipment is first used, and again at regular intervals, that all 
screws, bolts, nuts and other connections have been done up tightly, to ensure 
that your training equipment is in a safe operating condition at all items. 

z

 

Place the bike on an even, non-slippery surface. Because of possible corrosion, 
the usage of the bike in moist areas is not recommended. 

z

 

Check every 1-2 month that all connecting elements are tight fitting and are in 
the correct condition. 

z

 

Only carry out training work on the equipment when it is in perfect working 
order. 

z

 

One person for training may only use the equipment. 

z

 

The bike is designed for adult. Children are not allowed to use this bike. 

z

 

Always pay attention that you or any other persons never bring parts of the 
body in close proximity to any parts of the equipment that are still moving. 

z

 

Consult your physician before starting with any exercise program. He can 
advise which kind of training and impact is suitable. 

z

 

When making settings for any adjustable parts, check that they are in the right 
position and also check the marked maximum setting. 

z

 

Please follow the advice for correct training as detail in training instructions. 

z

 

This bike not suits for therapeutic use. 

z

 

The user’s max. Weight in 120 KGS. 

 
 

Summary of Contents for M-FUSION









Reviews: