10
Technical troubleshooting guide
PROBLEMS
SOLUTIONS
The kneading paddles remain stuck in the
bread trough.
• Let it soak before removing it.
The kneading paddles remain stuck in the
loaf.
• Use the accessory to turn out the loaf (page 30).
After pressing on
nothing happens.
• The machine is too hot. Wait 1 hour between 2 cycles.
• A delayed start has been programmed.
After pressing on
the motor is on but no
kneading takes place.
• The pan has not been correctly inserted.
• Kneading paddle missing or not installed properly.
After a delayed start, the bread has not
risen enough or nothing happens.
• You forgot to press on
after programming.
• The yeast has come into contact with salt and/or water.
• Kneading paddle missing.
Burnt smell.
• Some of the ingredients have fallen outside the pan: let the
machine cool down and clean the inside of the machine
with a damp sponge and without any cleaning product.
• The preparation has overflowed: the quantity of
ingredients used is too great, notably liquid. Follow the
proportions given in the recipe.
11
Warranty
• This product has been designed for domestic use only. Any professional use, innapropriate
use or failure to comply with the instructions, the manufacturer accepts no responsibility
and the guarantee will not apply.
• Read the instructions for use carefully before using your appliance for the first time: any use
which does not conform to these instructions will absolve Tefal from any liability.
12
Environment
• In accordance with current regulations, before disposing of an appliance no longer needed,
the appliance must be rendered inoperative (by unplugging it and cutting off the supply
cord).
Environment protection first!
Your appliance contains valuable materials which can be recovered or recycled.
Leave it at a local civic waste collection point.
For a detailed video on the shaping of the baguettes, download the filmed
instructions on the following internet site:
www.moulinex.com /
41
NoticeBaguette&Co_NC00013526:Mise en page 1 22/10/09 15:20 Page 41
