15 . Loaf Cooking
This baking programme enables you to cook for 10 to 70 minutes only,
which time can be adjusted by groups of 10 minutes, for light, medium or
dark browning. It can be selected on its own and used:
a) in association with the raised dough programme,
b) to heat or crisp up bread that has already been cooked and which has
cooled
c) to finish baking in the event of a prolonged power cut during a baking
cycle.
This programme cannot be used to bake individual loaves. The
breadmaker should not be left unattended when using programme
15. To stop the cycle before the end, stop the programme manually by
pressing the
button for a long time.
16. Bread Dough
The Leavened Dough programme does not bake. It is a kneading and rising
programme for all leavened doughs such as pizza dough, rolls, sweet buns.
17. Pasta Dough
Programme 17 only kneads. It is for unleavened pasta, like noodles for
example.
18. Cake
Program 18 makes it possible to make pastries and cakes using baking
powder. For this programme, only the 1000g weight is available.
19. Jam
Programme 19 automatically cooks jam in the tank. The fruit must be
roughly chopped and pitted.
5. Selecting the bread weight
• The bread weight is set by default at 1000 g. This weight is
shown for informational purposes.
• Refer to the recipe details for more information.
• The setting of the weight is not available for
programmes 1 to 7 and 13 15 16 17 18 19.
• Press the
button to set the chosen product – 750 g,
1000 g or 1500 g - fig. 9. The indicator light against the
selected setting comes on.
6. Selecting the crust colour
• The crust colour is set to medium by default.
• The browning setting is not available for programmes 7 15 16
17 19. Three choices are possible: LIGHT / MEDIUM / DARK.
• If you want to change the default setting, press the
button
until the indicator light facing the desired setting comes on.
7. Starting a programme
• To start the selected programme, press the button
.
The operating indicator light comes on and the 2 dots on
the timer start blinking. The programme starts. The time
corresponding to the programme appears. The successive
stages automatically follow one another.
28
NoticeBaguette&Co_NC00013526:Mise en page 1 22/10/09 15:20 Page 28
