Moulinex DFC4, User Manual

15

Moulinex service centre (see list in service
booklet).

- Do not use the appliance for juicing if the

filter  holder  on  the  juice  extractor  is
damaged.

- For your own safety, use only Moulinex

accessories and spare parts which are
suitable for your appliance.

- Always use the pushers to push food down

the feeder tubes, never use your fingers, a
fork, a spoon, a knife or other utensil.

- Only  remove  the  accessories  when  the

appliance has come to a complete stop.

- Do  not  introduce  any  utensil  (spoon,

spatula...) through the feeder tube.

- Do not place any utensil containing metal in

a microwave oven.

- Use the accessories one at a time.
- Handle the metal blade and discs with great

care: they are extremely sharp.

- You  must  remove  the  blades  (D)  and

spindle (C) before emptying the bowl of its
content.

- Empty the chopping bowl or liquidiser jug

before detaching the handle.

- Never touch the parts when they are moving.
- Do not run your appliance empty.
- Do not allow long hair, scarves, ties etc. to

dangle over accessories during operation.

- Never use or plug in your appliance if :
- Its power cord is faulty or damaged.
- The appliance has been dropped.
- It has visible damage or operating faults.
In such cases, to avoid any danger, contact
your Approved Service Centre to have the
appliance  repaired,  as  special  tools  are
required.

Using your appliance

- Before using for the first time, wash all

accessory parts in warm, soapy water.  Rinse
and dry.

- Place the motor unit on a flat, clean and dry

surface.

- Plug the appliance in.
- Vari  Pulse  (intermittent  operation):  turn

switch (A6) to the “Vari Pulse” position «0».
Using a succession of pulses can give you
better control when preparing certain foods.

- Continuous operation: turn switch (A6) to

position “1”.

- Stop: turn switch (A6) to position “0”.
- Speed selector (A5): select the suggested

speed or change it as required during
preparation.

- Before  using    the  liquidiser  drive  (A2):

ensure that there is no accessory fitted on
the bowl and drive accessory.

Functions of your food
processor

FITTING DETACHABLE PARTS

. A

SSEMBLING

 / 

DISMANTLING

THE

BOWL

 (B3)

The bowl is used with the following accessories
(depending on model):
- blades  (D), grating/slicing discs  (E), whisk

(F), emulsifying disc  (G), citrus press  (H),
juice extractor (J), “Maxipress” (L).

- If not already fitted,
- position drive (B3a) in the bowl.
- Lock the drive  (B3a) with the nut (B3b) as

far as it will go.

- Dismantle the bowl assembly and clean it

after each use.

. F

ITTING

/

DETACHING

THE

BOWL

HANDLE

 (B4)

AND

THE

LIQUIDISER

JUG

HANDLE

 (I4)

For ease of cleaning and storage, the bowl
handle (B4) and liquidiser jug handle (I4) are
detachable.
- To fit the handle, position it against the lugs

of the bowl/jug.

- Slide the handle upwards until it clicks.
- To detach the handle, press the release

button (B4a) or  (I4a) and slide the handle
downwards.

(note:  the  lid  of  the  liquidiser  jug  must  be
unlocked in order to be able to detach the
handle (I4).)
The handle (B4) must be fitted to the bowl
in  order  to  be  able  to  lock  the  liquidiser
drive cover (A1).

M I X I N G / B L E N D I N G / C H O P P I N G /
KNEADING

A

CCESSORIES

USED

 (

DEPENDING

ON

MODEL

)

- Bowl  assembly  (B),  spindle  (C)  and

blades (D):

. metal blade (D1) for mixing or chopping.
. plastic kneading blade  (D2)  for kneading,

blending pastry or cake making.

F

ITTING

THE

ACCESSORIES

Press the release button (A4) to open the
upper power outlet cover (A1).
- Fit the bowl (B3) on the bowl and accessory

drive (A3).

- Fit the spindle (C) on to the bowl drive (B3a).

1

2

Odacio DFC4-5-6_gb modif

20/07/04, 16:55

15