7. CAMERA SETTINGS
8
6. TRANSMIT TEST IMAGE
• Press and hold
CONNECT/STATUS
button for minimum of 5 seconds.
– Status LEDs will illuminate to display status, refer to table on page 7 for color definitions.
–
SIGNAL
and
SERVER
LEDs will flash yellow until connection is established, then
illuminate to indicate status. See table on page 7 for color definitions.
• Test image is taken and successfully transmitted once the server LED illuminates green and
then all LEDs turn off.
We strongly recommend you confirm receipt of test picture by logging in to
your Moultrie Mobile account via the app or website.
MANUALLY TRANSMIT IMAGES
You have the option to transmit any photos captured since the last connection by briefly
pressing and realeasing the
CONNECT/STATUS
button. Once the transmission is complete,
all LEDs will turn off.
Note:
Upload frequency setting is not affected by manual image transmit.