background image

Instructions for M-880 (Gen2) 

Series Digital Game Cameras

THANK YOU for your purchase of an M-880 (Gen 2) Series Digital Game Camera. Please 
read this booklet before using the unit. If you should have any questions about this product 
or any other Moultrie product, please contact us using the information on the back of 
this booklet. Please register your camera at 

www.moultriefeeders.com/warranty

 

to activate your warranty. 

CAMERA OVERVIEW

A

Page 1

M-880 (Gen2) Series Digital Game Camera

FRONT VIEW

BOTTOM VIEW

Status Indicator

LCD Display

Infrared LED Flash

QUICK START

CUSTOM START

AIM / OFF

OK/Select Button

Menu Button

Navigation Buttons

External Power Port

Push Button Release for battery compartment

USB Port

SD Card Slot

Camera Lens

Motion Sensor

Battery Tray

1/4” 20 Mount

Important Battery lnformation

- Only use Alkaline or Lithium batteries. We recommend the use of Duracell or Energizer batteries.
- Do not mix old and new batteries. Always replace ALL the batteries at the same time.
- When the camera is not in use, please remove the batteries.

Moultrie Limited Warranty

This product has been thoroughly tested and inspected before shipment. It is guaranteed from 
defects in material and workmanship from the date of purchase for 1 year. Under this limited 
guarantee we agree to replace or repair free of charge any part or parts which have been found to 
be defective in original material or workmanship. Should you require in-warranty service, call our 
Customer Service Department. If your problem cannot be addressed over the telephone, we may 
need you to send us your defective product plus proof of purchase.
You must register your camera at 

www.moultriefeeders.com/warranty

 to activate 

your 1-year warranty. 

Troubleshooting

Please visit 

www.moultriefeeders.com/contact-us 

for troubleshooting and helpful tips.

Returns and Repairs

Please visit 

http://www.moultriefeeders.com/return-policy

 and complete the form or our 

Service Department will gladly answer any questions you have. Call 800-653-3334, 
Monday - Friday, 8:00 AM to 5:00 PM CST.

www.moultriefeeders.com

FCC Statements

Moultrie Products

MCG-12691

Note: changes and modifications not expressly approved by the party responsible could void the user’s authority to operate this device.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful 
interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS 
EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT.

NOTE: This device complies with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide 
reasonable protection against harmful interference in a residential installation. This device generates, uses, and can radiate radio frequency energy 
and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no 
guarantee that interference will not occur in a particular installation. If this device does cause harmful interference to radio or television reception, 
which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the 
following measures:

- Reorient or relocate the receiving antenna.
- lncrease the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.

Moultrie Products

MCG-12693

10232014 / MCG-12691 • MCG-12693

M-880i (Gen2)

M-880 (Gen2)

PRADCO Outdoor Brands • 3280 Highway 31, Ste B • Calera, AL 35040

Summary of Contents for M-880









Reviews: