1. Press the button until the sub-code number starts to
flash.
2. Press or to change the sub-code number.
3. Press the PTT button to exit the menu.
Note: When sub-code “0” is selected, the radio can receive
transmissions from any radio on the same channel, regardless
of sub-code. However, only those radios also on sub-code “0”
will be able to receive its transmissions.
If the PTT button is held for longer than 60 seconds, radio will stop
transmitting. This is to prevent accidental transmission.
1. To talk, press and hold the PTT button. When transmitting, the
icon is shown. Release the PTT button when you are
finished talking. Do not use the radios closer than two meters
apart or the radios may experience feedback.
2. When receiving a transmission, the icon will be displayed.
Note: With all radios, it is good practice to hold the PTT button for
a half second longer before and after speaking to ensure your
transmission is not cut off.
PTT Timeout Timer
Setting the Sub-Code
Transmitting and Receiving
6
Summary of Contents for SCOUT 2W
Page 56: ......
