The scan function allows the user to listen for any activity on
any channel and its matched sub-code (as is selected in the
main menu).
1. Press the button to start scanning. The “SCAN” icon will
show and the display will cycle through the channels and
sub-codes being scanned for activity.
2. When activity is detected, the radio will stop scanning and
receive the transmission. At the end of transmission, press
the PTT button within five seconds to respond. Otherwise the
radio will resume scanning.
3. If the PTT button is pressed while the device is scanning, the
transmission will be sent on the main selected channel.
4. Press the button to exit scan mode.
Note: If the device stops on an unintended/undesired
transmission, press or to resume scan OR temporarily
remove that channel from the scan list by pressing and holding
or for three seconds.
To restore removed channels to the scan list, press to exit
and re-enter scan mode.
To transmit a call tone, press the button.
Setting the Call Tone
1. To select the call tone to be used, press the button until
the call tone menu “CA” appears. The flashing number
indicates the current call tone.
2. Press or to change the call tone.
3. Press the PTT button to exit the menu.
Note: Call tone “0” mutes the call tone feature. No call tone will
be sent, but they can still be received.
Call Tone
The keypad lock feature prevents accidental keypad button
activation. This is especially useful when the radio is used with
the included speaker microphone accessory and placed inside
a backpack or otherwise secured.
1. To lock the keypad buttons, press and hold the button
until the lock indicator is displayed.
2. Repeat the procedure to unlock the keypad.
Keypad Lock
Scan
KEYPAD FEATURES
7
Summary of Contents for SCOUT 2W
Page 56: ......
