17
ess MBP 2.5 / MBP 4.0 MOuntain Man Owner’s Manual
you may wish to purchase nutra-sol tank Cleaner from ess (s/n#
1566), which cuts hard water scale and chemical deposits from the
electrode and internal component of the spray gun. the regular use of
nutra-sol will keep your equipment operating at peak performance.
the recommended mixing ratio is 4 ounces in 12.5 gallons of water
(113 grams in 47 liters of water).
Pre-spray check
i. inspect nozzles
Check nozzle cover to make sure it is on hand tight (do not
over tighten or use a wrench). Make sure the hood is seated
firmly to the nozzle base and against the external o-ring.
ii. Preparing the tank Mix
if you will be spraying wettable powders it is a good idea to
use a compatibility agent with the water and tank mix.
Compatibility agents are chemicals mixed with the water
that make mixing easier and keep heavy concentrations
uniformly in suspension. some brand name additives are
COMPliMent™, unite®, and BalanCe™. Check with your
local chemical supplier for others that are available.
Post-spray check
after each spray it is essential that hoses and spray gun be
flushed with clean soapy water. this will help prevent
chemical build-up that can clog lines and nozzles. also, it is
recommended that the nozzle exterior (black portion of
nozzle) and nozzle hoods be cleaned with soapy water at this
time.
ESS recommends the use of
NUTRA-SOL cleaner which
can be purchased from ESS.
Order s/n#1566.
