To avoid potential personal injury or property damage:
1. Make sure the
BOLT HEAD
on the wall plate is upward as the picture shows.
2.
Solid
concrete wall's thickness should be more than 100mm/4", and the wall must be
capable of supporting five times the weight of the TV plus the mount.
3. All anchors/lag bolts MUST BE firmly tightened to prevent unwanted movement of the wall plate.
Ensure the wall plate is securely fastened to the wall before continuing on to the next step.
Concrete wall
Option 2 Wall plate installation on concrete wall
①
③
CAUTION
Make sure the
BOLT HEAD
on the wall plate is upward
Stick the bubble level on the
Mounting template , put on
your desire position, adjust it make
it level and stick it on the wall.
Use 3/8" diameter drill bit to
drill 4 holes at marked
positions to a depth of 2.5".
Take down the Mounting template,put 4 Concrete Wall
Anchors (not included in the package) into drilled holes,
and tap each anchor flush with the wall by using a
hammer. Then put 4 lag bolts through the washers
into the anchors, and tighten each bolt by using a socket
wrench to mount the wall plate securely. Before totally
tightening the lag bolt please attach the bubble level on
the wall plate to check whether it is level.
3/8"
②
24" wood stud
side holes on
two studs
Use 7/32" diameter drill bit to
drill 4 pilot holes at marked
positions to a depth of 2.5".
Place Mounting template
along the centerlines, level it
and stick it, and use pencil to
mark 4 hole locations on the
wall.
7/32"
24"
③
④
⑤
Take down the Mounting template, put 4 lag bolts
through the washers into the drilled holes, and tighten
each bolt by using a socket wrench to mount the wall plate
securely. Before totally tightening the lag bolt please attach
the bubble level on the wall plate to check whether it is
level.
Make sure the
BOLT HEAD
on the wall plate is upward
UP
④
No!
No!
