⑤
4
Put 4 lag bolts through
the washers into the
drilled holes, and tighten
each bolt by using a socket
wrench to mount the wall
plate securely.
Before totally
tightening the lag bolt please
attach the bubble level on
the wall plate to check
whether it is level.
To avoid potential personal injury or property damage:
1. Make sure the
BOLT
HEAD
on the wall plate is upward as the picture shows.
2.
Solid
concrete wall's thickness should be more than 100mm/4", and the wall must be
capable of supporting five times the weight of the TV plus the mount.
3. All anchors/lag bolts MUST BE firmly tightened to prevent unwanted movement of the wall plate.
Ensure the wall plate is securely fastened to the wall before continuing on to the next step.
Concrete wall
Option 2 Wall plate installation on concrete wall
CAUTION
3/8"
UP
Level
Make sure the
BOLT HEAD
on the wall plate is upward
①
②
③
Level the wall plate and use
wall plate as a template and
pencil to mark 4 side hole
locations on your desired
height of the wall.
Use 3/8" diameter drill bit to
drill 4 holes at marked
positions to a depth of 2.5".
Put 4 Concrete Wall Anchors
(not included in the package)
into drilled holes, and tap each
anchor flush with the wall by
using a hammer. Then put 4 lag
bolts through the washers
into the anchors, and tighten
each bolt by using a socket
wrench to mount the wall plate
securely.
Before totally
tightening the lag bolt please
attach the bubble level on the
wall plate to check whether it is
level.
390mm/15.3"
