Assembling your ZeroCable
With your purchase we’ve included a ZeroCable, some heat-shrink and a couple of JST 5-pin connectors.
In this section we’ll arrange and assemble these parts so that the cable is ready to be installed on your
mouse.
Step 1 - Thread the ZeroCable through the 2 black heat-shrinks and the 1 clear heat-shrink. Do
not heat them up yet.
Step 2 - Grab one of the JST 5-pin connectors and orient it so
that the completely solid side is facing down and the side with
holes in it is facing up.
Step 3 - On the next page starts the database of all the mice ZeroCable is compatible with. Find
your mouse and note the order of the colors.
Step 4 - One by one insert the colored wires into their designated spots in the JST connector as
specified by the database. The “nothing” signifies that no wire should be inserted in that spot.
The small “hook” on the wires should be facing up when trying to insert them into the JST
connector.
Example:
Mouse: Zowie FK2
Order:
nothing
black
green
white
red
