54
MCTC manual
Injection molding
–
open loop - gravimetric mode
Actual production data:
Using the toggle button , you can switch between production settings and production data.
1.
Set and actual output:
Set.: Re-calculated output (% kg/h, gr/sec)
Act.: Actual additive output ((%, gr/s or kg/h)
actual additive output is only visible after the first automatic RPM adjustment.
2.
Speed:
Actual motor speed (RPM)
3.
Hopper weight:
Material weight in the hopper
4.
Time:
Set dosing time (sec), when working TIMER input mode.
The average dosing time (sec), when working in RELAY input mode.
5.
Act. Time:
Count down of the actual dosing time (sec)
1
1
4
5
2
2
3
3
