3
Step 2: Fit the LED622 LED Bulb into the lamp socket.
Step 3: Turn ON the switch and check if the LED622 LED Bulb flashes
twice, if so follow the below steps, otherwise, please refer to the
FAQ section.
Step 4: Turn OFF the Switch
Step 5: Select “Add new devices” in the menu of the app.
Tip: for this step, press the “Z” button of the gateway for two
seconds until the LED indicator turns solid blue.
Step 6: Turn ON the switch, the LED622 LED Bulb will flash twice.
Step 7: The LED622 will try to pair with the gateway, the LED622 LED
Bulb will flash once more when pairing is successful. Please go to the
app to check if it is paired successfully.