20
Movex Innovation Inc.
OPERATING INSTRUCTIONS
P
OSITIONING A
L
OAD ON THE
T
RACK
-O
1.
Make sure the “ON-OFF” switch is OFF prior to putting load on the TRACK-O.
O
N
S
TAIRS
2.
When placing the load on the Twin-Track for climbing and descending stairs, the
center of gravity of the load must be closer to the Front of the machine than the
center of gravity of the Twin-Track (see diagram below). The center of gravity of
the Twin-Track is indicated by a pictogram on the side of the platform.
O
N
I
NCLINES
(
HILLS
,
GULLIES
,
ETC
)
W
HEN CLIMBING STAIRS THE
T
RACK
-O
CLIMBS
F
RONT
-
END FIRST
.
W
HEN DESCENDING STAIRS
,
THE
T
RACK
-O
MOVES BACKWARDS
:
R
EAR
-E
ND FIRST
.
T
HIS MEANS THE
F
RONT
-E
ND SHOULD ALWAYS BE
AT THE HIGHER END OF THE STAIRS
.
I
N CASES WHERE THE TRACK
-
O CAN BE TURNED SO THAT THE FRONT END IS ALWAYS ON
THE HIGHER END OF THE HILL
:
THIS MEANS
,
CLIMBING FRONT
-
END FIRST AND
DESCENDING REAR
-
END FIRST
(
BACKWARDS
)
–
T
HE
I
NSTRUCTIONS FOR CLIMBING
STAIRS APPLIES
.
I
N CASES WHERE THE TRACK
-
O WILL BE MOVING UP AND DOWN IN THE SAME
DIRECTION
–
FOR EXAMPLE
:
GOING DOWNHILL FRONT
-
END FIRST AND THEN GOING UP
HILL FRONT
-
END FIRST
–
THE LOAD MUST BE PLACED AT THE CENTRE OF THE TRACK
-
O
.
Front
Rear
TRACK-O
Center of gravity
