21
..take a position as described in chapter 3 and 7.2.
3.2
The Movexx T1000-D…
..may only be used after it has been checked and has been approved on damage,
functionality and if all part are actually there. This concerns the whole combination!
..may only be used in its original construction state and controlled as described in this
manual (chapter 3 en 7).
..may only be used as drag machine, as these objects are attached to this machine with a
couple piece.
..may only drag objects from A to B on a flat or rising underground and only be used in a
pulling position
. In the case of a descending slope where the machine has a slowing down
function you only may use the machine in a pushing position. To position the object you may
push as well as pull.
..may only be used when the
operating arm
is positioned as described in chapter 6. Only
when you transport the machine you may use the operating arm in a folding position.
..may not be loaded with more weight than is permitted within your company and also not
heavier loaded than is safely permitted.
3.3 General:
Without authorization of the supplier/manufacturer one is not allowed to weld or change
anything.
