26
OPERATION (cont.)
Cool Mode Operation
1.
If the unit is in standby mode, simply press
MODE button until “COOL” appears, then press
START/STOP button. LCD displays a
confirmation screen. Press START/STOP
button once again to start COOL mode
operation. LED color changes from orange to
green.
Note: If no button is pressed for 1 minute, LCD
automatically displays the previous mode.
2.
If the unit is already in operation, press MODE
button once. The operation status screen
displays the current operation mode. Press
TEMP+ or -TEMP button to go to COOL, then
press ENTER button to select.
3.
LCD displays a confirmation screen as shown
on the right.
4.
Use TEMP+ or -TEMP button to change set
point temperature. LCD displays “MIN” or
“MAX” when set point value is at minimum or
maximum.
5.
Use FAN+ or -FAN button to change fan speed
(HI, MID, LO).
6.
To stop COOL mode operation, press START/
STOP button. LCD displays a confirmation
screen. Press START/STOP button again. LED
color changes from green to orange.
ILL00785-00
ILL00786-00
ILL00787-00
ILL00788-00
ILL00789-00
