35
OPERATION (cont.)
Program Operation and Schedule (cont.)
Starting Program Operation
This feature starts unit operation according to the preset program slots.
1.
Press MENU/ESC button to go to MENU.
Note: If no button is pressed for 1 minute, LCD
displays the previous mode.
2.
Use TEMP+ or -TEMP button to select
PROGRAM OPERATION and press ENTER
button to confirm.
3.
Select START under program operation feature
and press ENTER button to confirm.
4.
LCD displays a confirmation screen as shown
on the right.
Note:
• When program starts running, LCD displays
“PROGRAM RUNNING” and “KEY LOCKED”
with room temperature. LED turns green.
• LCD backlight always stays on during
cooling, heating, or fan only operation when
program is running.
• LCD backlight turns off during standby mode
when program is running. LED stays green.
ILL00816-00
ILL00822-00
ILL00823-00
ILL00824-00
ILL00825-00
