MTUX/IA-63-00 – Installation Manual
61
Date: 2017/02/17
00
9.2 Connection of system components for data transfer
9.2.1 Block diagram of system components
Fig. 9.2.1: Block diagram connections
NOTE
The components of the system must be correctly connected:
For pin assignment of the central connector please refer
to section “5.5 Pin layout of the central connector (50-pin
MDR)”.
9.2.2 Connection options and Limitations
8
Depending on location of the unit there are different connection options:
When the unit is mounted on the Easy mount in the cockpit: use the USB
port of the central connector and the provided USB cable with central
connector to connect the satellite telephone or the UMTS-Modem. Make
sure to provide reliable power supply for the telephone (on board power).
When connecting the satellite telephone via USB port of the central
connector, it is necessary to install a satellite telephone holder
for Iridium 9555 (for units with SP type of CPU) with a hub, see
following section “6.3 Installation of the satellite telephone holder”.
•
•
MT-VisionAir X ETSO
+ Satellite Radar Module /
MT B
litz
P
lan
Fast Integral GPS/
GPS antenna
or BIOS time
Satellite phone or UMTS Modem
Antenna
Central connector
USB
cable
Power
Power
Summary of Contents for MT-VisionAir X ETSO
