58
SPECIFICATIONS
Reverse Driving
●
Place your hands on the handgrips.
●
Use one of your fingers to press the
Direction
button located on the left side of the driving
console.
●
You should hear a double beep confirming that
you are now driving backward. If you hear a
single beep you are in forward Drive mode and
should press the
Direction
button again.
●
Use your right thumb to operate the drive
throttle. Press the throttle lightly to move
backward.
●
Increase the pressure applied by your thumb to
increase your reverse speed.
●
To stop ATTO, release all pressure on the
throttle. The throttle will automatically return to
the upper (off) position and your ATTO will
come to a gradual stop.
●
Note that for safety reasons, ATTO's speed in
reverse is slower than the maximum speed limit
set on the speed control dial.
Cruise Control (ATTO SPORT Only)
Pressing
“
+
” and “
-
“ simultaneously while
squeezing the throttle will activate the scooter’s
automatic Drive mode (Cruise Control). This tells
the scooter to travel consistently at the last speed
determined by the driver without having to activate
the throttle. Cancel Cruise Control by pressing any
button, the manual brake lever or the throttle lever.
Note: Before switching to Cruise Control mode,
make sure the path ahead is clear and the defined
speed is suitable for its conditions.
Stoppin
To slow down and stop, just let go of the drive
throttle, and it will return to the upper (off) position.
The ATTO automatically brakes using the
regenerative brake. This should be followed by
entering the ATTO into Parking mode using the
electro-mechanical brake.
The manual front handle brake on the ATTO
SPORT is an addition to the above and not a
replacement.
Summary of Contents for ATTO
