40
SPECIFICATIONS
Opening
1. Position your ATTO on a flat surface before
opening. Make sure you have clearance of 2
meters (7 feet) from the side of the rear wheels.
Operations described below are done near and
around pinch points. Be careful and follow
instructions to prevent injury. Make sure you
keep your fingers away from moving parts that
may close during opening.
2. Release the adjustment lever of the handlebar
(see Figure 4, step 1) and bring the handlebar
to an upright position (see Figure 4, step 2),
then bring the lever back to its secured position
(see Figure 4, step 3).
Figure 4
3. Press the central release button until it clicks
and remains pressed (see Figure 5).
Figure 5
4. Press the red button (see Figure 6, step 1) and
tilt it away from the main ATTO body (see
Figure 6, step 2).
Figure 6
CAUTION
Summary of Contents for ATTO
