- 11 -
LED Indicators
The front panel of the Moxa AWK-5222 contains several LED indicators.
The function of each LED is described in the table below:
LED
Color
State
Description
Front Panel LED Indicators (System)
PWR1
Green
On
Power is being supplied from power
input 1.
Off
Power is
not
being supplied from
power input 1.
PWR2
Green
On
Power is being supplied from power
input 2.
Off
Power is
not
being supplied from
power input 2.
PoE
Amber
On
Power is being supplied via PoE.
Off
Power is
not
being supplied via PoE.
FAULT
Red
Blinking
(slow at
1-second
intervals)
Cannot get an IP address from the
DHCP server.
Off
No error condition exists.
STATE
Green/Red
Green
System startup is complete and the
system is in operation.
Green
(Blinking at
1-second
intervals)
The AWK has been located by the
Wireless Search Utility
Red
System is booting up.
WLAN1
Green/Amber
Green On WLAN1 function is in
client
mode.
Blinking
Green
WLAN1’s data communication is
running in
client
mode.
Amber On
WLAN1 function is in
AP/bridge
mode.
Blinking
Amber
WLAN1’s data communication is
running in
AP/bridge
mode.
Off
WLAN1 is not in use.
WLAN2
Green/Amber
Green On WLAN2 function is in
client
mode.
Blinking
Green
WLAN2’s data communication is
running in
client
mode.
Amber On
WLAN2 function is in
AP/bridge
mode.
Blinking
Amber
WLAN2’s data communication is
running in
AP/bridge
mode.
Off
WLAN2 is not in use.
TP Port (LAN1, LAN2) LED Indicators (Port Interface)
10M
Yellow
On
TP port’s 10 Mbps link is active.
Blinking
Data is being transmitted at 10
Mbps
Off
TP port’s 10 Mbps link is inactive.
100M
Green
On
TP port’s 100 Mbps link is active.
Blinking
Data is being transmitted at 100
Mbps
Off
TP port’s 100 Mbps link is inactive.
