2-6
C168P User’s Manual
3.
Enter the CAP address of the C168P board to be configured.
4.
Configure the following parameters as necessary.
Port Index
Indicate the port index for each port.
I/O address
Enter the base I/O address for each port, either sequentially or
not. Avoid to conflicting with any other devices.
IRQ
Enter the IRQ, 2, 3, 4, 5, 7, 10, 11, 12 or 15, for each port,
independently or not.
Speed
This field specifies the use of
normal or high speed
capability.
Normal speed ranges from 50 bps to 115.2 Kbps. High speed
ranges from 50 bps to 921.6 Kbps. C168P support only normal
speed spectrum. In other word, it is not available for speed
faster than 115.2K bps.
Summary of Contents for C168P
Page 22: ...2 8 C168P User s Manual...
Page 46: ...3 24 C168P User s Manual...
Page 56: ...4 10 C168P User s Manual...
Page 68: ...5 12 C168P User s Manual...
