Universal PCI Board
Software Installation
3-51
5.
Click OK to approve the settings for the selected port. Continue in the same way to configure the other ports.
When you have finished setting up the ports, click OK to close the Properties window and apply the new
port settings. Click OK again to exit the Network applet.
Removing the Board
To remove a board, shut of your PC and physically remove the board from the PCI slot. The next time you start
up the PC, Windows NT will automatically remove the configuration. You do not need to go through the
Windows control panel.
Updating the Driver
1.
In Windows Control Panel, open the Network applet. In the Adapters tab, UPCI boards will appear as a
type of Moxa adapter (Moxa Smartio/Industio Family Adapter in this example). Select the Moxa
adapter and click Remove.
2.
Restart the system. Go through the process of installing the drivers using the new drivers.
