Universal PCI Board
Software Installation
3-72
11.
Configuring FIFO and index: Setting the FIFO registry value to 1 enables the FIFO function and 0 disables
it. The index allows you to define the initial COM port number in WinCE, but before using this function; make
sure that the COM port numbers do not conflict.
12.
Open Build and select Advanced Build Commands and choose Build Sysgen. This operation will take
you a few minutes.
13.
After building sysgen, select Build and choose Make Run-Time Image to create the WinCE OS image.
Finally, copy your image file to the target Host.
