Universal PCI Board
Software Installation
3-52
Removing the Driver
1.
In Windows Control Panel, open the Network applet. In the Adapters tab, UPCI boards will appear as a
type of Moxa adapter (Moxa Smartio/Industio Family Adapter in this example). Select the Moxa
adapter and click Remove.
2.
Click OK to exit the Network applet and restart the system.
Windows 95/98/ME
This chapter explains how to install, configure, update, and remove the board drivers for Windows 95/98/ME.
The following models are supported:
2 Ports
4 Ports
8 Ports
CP-112UL/CP-112UL-I
CP-114UL/CP-114UL-I
CP-118U/CP-118U-I
CP-132UL/CP-132UL-I
CP-134U/CP-134U-I
CP-138U/CP-138U-I
CP-102UL
CP-104UL
CP-168U
CP-102U
CP-104JU
CP-102UF
POS-104UL
Windows 95/98/ME supports up to 128 serial ports, from COM1 to COM128. In order to fully utilize the
advanced multi-process and multi-thread features of Windows 95/98/ME, Moxa developed pure 32-bit virtual
device port drivers (VxD) that are compliant with communication drivers (VCOMM). The drivers conform to the
Win32 COMM API standard.
You can download the drivers from the Moxa website. For information on developing your own serial
programming applications, please refer to Chapter 9.
Before installing the software, be sure to install the hardware first. For details on installing the hardware, please
refer to Chapter 2.
Installing the Driver
The following instructions show how to install the driver for the first time under Windows 95/98/ME. You will
need to plug the board in an available PCI or PCI-X slot first, before installing the driver.
