DA-660A Series HW UM
Hardware Connection Description
3-5
ATTENTION
Do not use the 1 KΩ setting on the
DA-660A when using the RS-232 interface. Doing so will degrade the
RS-232 signals, shorten the maximum allowed communication distance, and the Rx LED may light up.
Connecting to the Console Port
The console port on the DA-660A is an 8-pin RJ45 RS-232 port. The pin definition is the same as for the
serial ports (P1 to P16).
USB Host
The DA-660A offers 2 USB 2.0 hosts, allowing you to connect with a USB storage device. The first USB mass
storage device to be connected will be mounted automatically to
/mnt/sdc
and the second device will be
mounted to
/mnt/sdd
using the
mount
command. The storage device will be un-mounted automatically
with the
umount
command when it is disconnected.
CompactFlash
The DA-660A Series computers have a built-in CompactFlash socket. The CompactFlash socket allows users
to add additional memory by inserting a CompactFlash memory card, without any risk to the computer.
Follow the instructions below to insert a CompactFlash card:
1.
Turn off the DA-660A.
2.
Insert the CompactFlash card into the socket.
3.
Turn on the DA-660A.
ATTENTION
The DA-660A Series computers do not support CompactFlash hot swap and PnP (Plug and Play) function.
You MUST turn off the DA-660A before inserting or removing the CompactFlash card.
