EXPC-1319 Series Hardware
Introduction
1-7
LED Indicators and Buttons
The EXPC-1319 comes with six LED indicators and five control buttons on the bottom of the front panel.
LED Indicators
Function
Power
On
Power is on.
Off
Power is off.
Heater
On
Heater is working. (Note that this function will be enabled when
below -20˚C)
Off
Heater is not working.
Storage
Blinking
Storage (SSD or CF) is accessing.
Off
Storage (SSD and CF) is not accessing.
Fiber
Reserved for optional function
LAN1 & LAN 2
On
Network is transmitting or receiving data.
Off
Network is not transmitting or receiving data.
Control Buttons
Function
Power
Press to turn on the computer. Press again to turn
off the computer.
Brightness
Press + button to increase the brightness of the
panel. Press – button to decrease the brightness of
the panel.
Function
Customizable function key, can be configured by
the utility. The default value will enable a virtual
keyboard function. Refer to Software User’s
Manual for configuration details.
Touch screen
Touch to enable the touch screen function
(default). Touch again to disable.
LCD Panel and Touch screen
The EXPC-1319 comes with 1000 nits TFT LCD panel with touch screen bonding.
The 1000 nits TFT LCD panel means the panel’s brightness at its central point is 1000 cd/m
2
. Due to the
characteristics of liquid crystal in TFT LCD panels, even though the EXPC-1319 will work properly between -20
and 60˚C (-40 to 60˚C with Intelligent Heating Solution), to extend the panel’s life Moxa recommends
maintaining the working temperature between 0 and 50˚C whenever possible. Some areas on the LCD panel
might distort some colors to black at extremely high temperatures, or respond sluggishly at extremely low
temperatures.
The touch screen used on the EXPC-1319 includes hardened resistive glass-film-glass single point touch screen
(STS) or a capacitive type multipoint touch screen (MTS). Different touch screen technologies allow different
