EXPC-1319 Series Hardware
Regulatory Statement Approval
B-2
Electromagnetic Compatibility Directive
European EMC for Industrial Control
Equipment
Self-Declaration in accordance
with EMC Directive
2004/108/EC; Independent 3
rd
party assessment (Accredited by
IEC 17025 )
Explosive Atmospheres Directive
European Safety for Hazardous Locations
Equipment Group II, Category 3, Gas
Group IIC
Certification with ATEX Directive
94/9/EC; Independent 3
rd
party
assessment (Notified Body:
DEMKO)
IEC Certification Scheme for Explosive
Atmospheres
Equipment Group II, Category 3, Gas
Group IIC
IECEx Certificate of Conformity;
Independent 3
rd
party
assessment (Certified by UL)
Ex ic nA nC IIC Gc
IEC 60079-0, 60079-11,
60079-15
Explosion Hazard
Component substitutions may impair suitability for UL Class 1 Division 2, ATEX Zone 2, EN 60079-15, and
IECEx.
Do not connect or disconnect equipment unless power has been switched off or the area is known to be
non-hazardous.
Do not install or remove CompactFlash card, SSD, or HDD while circuit is alive.
The battery used in this device may present a fire or chemical burn hazard if mistreated. Do not
disassemble or incinerate. Dispose of used batteries promptly. Keep away from children.
The proper method for removing power from the unit is to switch off power at the circuit breaker.
Enclosure Cover Warning - Explosion hazard - Do not remove cover unless area is know to be
non-hazardous. (Warning is applicable to any removable cover on the unit - HDD access door, etc.)
I/O Cover Warning - For hazardous area installations reference manual for field wiring control drawing.
The device is intended for mounting in a tool-accessible ATEX-certified or IECEx-certified IP54 enclosure
and used in an area of not more than pollution degree 2 as define by IEC 60664-1.
