ioLogik E1200 Series
Using the Web Console
3-14
Peer-to-peer Settings
Peer-to-peer Settings (1-50)
The ioLogik E1200 supports up to 50 peer-to-peer mapping rules. You can configure the channel settings 10 at
a time. To enable the rules, either select the
Enable All
box to enable all 10 channels, or select the
Enable
box
individually for each rule. The
Local Channel
drop-down menu allows you to specify the channel of the ioLogik
E1200 to configure. Type the IP address and port number of a remote ioLogik E1200 in the
Remote IP
and
Remote Ports
fields, respectively. The
Remote Channel
field is for you to select input channels of the remote
ioLogik E1200 when you select output channels in the
Local Channel
field. Set the
Interval Time
and
On
change
percentage on the local ioLogik E1200 that will trigger the transmission of a mapping signal to the
remote ioLogik E1200. The default local listen port number is 9020; this value can be set between 1 to 65535.
NOTE
If you select a DI or AI channel in the Local Channel field, the Remote Channel field will be disabled. You need
to configure the DO or AO channel on the remote ioLogik E1200.
Sample Configuration
The following is an example of configuring DO (Server IP: 192.168.127.253) to DI (Client IP: 192.168.127.252)
peer-to-peer functionality with two ioLogik E1200 devices.
Server settings:
