- 5 -
VESA Mounting
The MPC-2000 series also comes with an optional VESA mounting kit. Six
flat screws and four round screws are required to attach the VESA
mounting bracket. See the following figure for detailed screw
specifications and torque values.
An additional four screws (not included in the kit) are required to mount
the MPC-2000 series on a VESA rack. For this purpose, use M6 screws
with a length between 10 and 12 mm.
Connector Description
Extending the Display
The MPC-2000 series comes with both standard VGA (DB15) and DVI-D
(DB29) interfaces (on the bottom panel) that can be used to
simultaneously display across two monitors.
Connecting to a Keyboard and Mouse
The MPC-2000 series comes with
two PS/2 connectors located on the
bottom panel for connecting a
keyboard and a mouse.
