Moxa Industrial Smart Ethernet Switch
Quick Start Guide
2-13
Configuration File Encryption Setting
Setting
Description
Factory Default
Enable Password
1.
In order to back up an encrypted configuration file from a
smart switch, select the checkbox and type in a password to
enable encrypting the configuration file when it is
downloaded.
2.
When loading the encrypted configuration file into a smart
switch, first enable the function and type in the
corresponding password to decrypt the configuration file
while it is being loaded.
unchecked
Automatically Load and Restore the Configuration
Setting
Description
Factory Default
Automatically load
configurations from the
ABC-02 to the system
when booting up
1.
Enable this function by selecting the Automatically load
configurations from ABC-02 to the system when
booting up checkbox and then click Apply.
2.
Power off your switch first, and then plug in the ABC-02.
When you power on your switch, the system will detect the
configuration file on the ABC-02 automatically. The switch
will recognize the file name, with the following sequence
priority:
•
First priority: MAC.ini
•
Second priority: Sys.ini
If no matching configuration file is found, the fault LED light
will turn on, and the switch will boot up normally.
NOTE: The MAC.ini configuration file should be named using
the last 6 digits of the switch’s MAC address, without spaces.
Checked
Automatically backup
to ABC-02 when
configurations change
1.
Enable this function by checking the Automatically
backup to ABC-02 when configurations change
checkbox and then click Apply.
2.
Attach a Moxa ABC-02 for backing up the switch
configuration files automatically. Once the current
configuration is modified, the switch will back up the
modified configuration to the /His_ini folder on the
ABC-02. The file name will be the system date/time
(MMDDHHmm.ini).
NOTE: MM=month, DD=day, HH=hour, mm=minutes, from
the system time.
unchecked
