TAP-125-U-W-X-Z
(YYYYYYYY)
Web Console Configuration
3-8
Basic Wireless Settings
The “WLAN Basic Setting Selection” panel is used to add and edit SSIDs. An SSID is a unique identifier that
wireless networking devices use to establish and maintain wireless connectivity. Multiple access points on a
network or sub-network can use the same SSIDs. You can configure your TAP to use up to 9 SSIDs, and
configure each SSID differently. All of the SSIDs are active at the same time; that is, client devices can use any
of the SSIDs to associate with the access point.
Click on Add SSID to create more SSIDs.
Click on Edit to assign different configuration settings to each SSID. The configuration panel appears as
follows:
RF type
Setting
Description
Factory Default
2.4 GHz
B
Only supports the IEEE 802.11b standard
B/G/N Mixed
G
Only supports the IEEE 802.11g standard
B/G Mixed
Supports IEEE 802.11b/g standards, but 802.11g may operate
at a slower speed if when 802.11b clients are on the network
G/N Mixed
Supports IEEE 802.11g/n standards, but 802.11ac Wave 2 may
operate at a slower speed if 802.11g clients are on the network
B/G/N Mixed
Supports IEEE 802.11b/g/n standards, but 802.11g/n may
operate at a slower speed if 802.11b clients are on the network
N Only (2.4GHz)
Only supports the 2.4 GHz IEEE 802.11ac Wave 2 standard
5 GHz
A
Only supports the IEEE 802.11a standard
A/N Mixed
Supports IEEE 802.11a/n standards, but 802.11ac Wave 2 may
operate at a slower speed if 802.11a clients are on the network
N Only (5GHz)
Only supports the 5 GHz IEEE 802.11ac Wave 2 standard
AC
Only supports the 5 GHz IEEE 802.11ac standard
