- 13 -
LED
Color
State
Description
STATE
Green
On
System startup is complete and
the system is in operation
Blinking (fast
at 0.5-sec
intervals)
AeroLink Protection is enabled
and is currently in “Backup” state
Blinking (slow
at 1-sec
intervals)
Device has been located by
Wireless Utility
Red
On
System is booting up
WLAN
Green
On
WLAN is functioning in
client/client-router
mode
Blinking
WLAN is transmitting data in
client/client-router
mode
Off
WLAN is not in
client/ client-
router
mode or has not
established a link with an AP
Amber
On
WLAN is in
AP
mode
Blinking
WLAN is transmitting data in
AP
mode
Off
WLAN is not in use or is not
working properly
LAN1
(10/100/
1000
Ethernet
port)
Green
On
LAN port’s 1000 Mbps link is
active
Blinking
Data is being transmitted at 1000
Mbps
Off
LAN port’s 1000 Mbps link is
inactive
Amber
On
LAN port’s 10/100 Mbps link is
active
Blinking
Data is being transmitted at
10/100 Mbps
Off
LAN port’s 10/100 Mbps link is
inactive
.
LAN2
(100/1000
fiber
optical
port)
Green
On
LAN port’s 1000 Mbps link is
active
Blinking
Data is being transmitted at 1000
Mbps
Off
LAN port’s 1000 Mbps link is
inactive
Amber
On
LAN port’s 100 Mbps link is
active
Blinking
Data is being transmitted at 100
Mbps
Off
LAN port’s 100 Mbps link is
inactive
NOTE
The WLAN 2 LED is reserved for future use.
