- 10 -
2.
Insert the cellular module
into the socket and fasten
two screws (included in the
package) on to the top of the
module.
We recommended using a
tweezer when installing or
removing the module.
3.
Connect the free ends of the
two antenna cables next to
the screws as shown in the
image.
4.
Replace the cover and secure
it using two screws.
5.
Connect the cellular antennas
to the connectors.
Antenna connectors are
located on the front panel of
the computer.
The Wi-Fi module package includes 1 Wi-Fi module, and 2 screws. The
antenna adapters and Wi-Fi antennas should be purchased separately
to fit your installation requirements.
Follow these steps to install a Wi-Fi module.
1.
Set the antenna cables
aside for convenience of
installation and clear the
wireless module socket as
shown in the figure.
