- 5 -
The wall screws should use the M3
type, and the length should no less
than 7 mm.
Option 2 – Rear-mounting with WK-UP200A-BAK-SI
UPort
TM
207A
Unit: mm (inches)
UPort
TM
204A
First, attach the brackets at the
rear of the UPort™ 200A with the
screws, as the circles show. The
recommended screw tightening
torque: 4.5 kgf-cm +/- 0.5,
screw type: type F, PH2. Next,
mount the unit to a wall with the
screws.
The wall screws should use the M3 type, and
the length should be no less than 7 mm.
The mounting kit is 2 mm in height, and the two centers of mounting
kit on each plate is 168 mm (for UPort 207A) and 128 mm (for UPort
204A) apart.
