20
1. Do not drop, hit or submerge the main device
and Voltage Protector in water.
2. The installation and placement of this main
device is designed to prevent water seepage
or one from falling into the bathtub.
3. Please check that the voltage of the socket
is 220V before using.
4. Do not splash water directly on to the main device and power switch so as
to prevent power leakage, breakdown and ensure safe usage.
5. The soft pad is considered a consumable product. Remove it gently from
the suction disc. Do not exert force, otherwise any tearing, breakdown etc.
of the soft pad shall be replaced with cost.
6. Maintain cleanliness of the soft pad at all times. Use a soft, long bristle
brush for cleaning. Do not submerge the soft pad in the bathtub for
prolonged period. Hang it to drip dry after use so as to protect the proper
functioning of the components.
7. The company is not liable for any unauthorized dismantling of or repairs to
the main device.
Attention
Contact our
service
departmant
Contact our
service
departmant
Contact our
service
departmant
Troubleshooting
Malfunctions
Solution 1
Solution 2
Solution 3
Main device
does not
start up
Turn Timer and Bubble
Intensity Control clock
wise to proper setting;
if correctly done, "Input"
indicator will light up
Check whether the
surface of bathtub
bottom is smoother or
has marks/protrusions
e.g. Dirt, non-slip pads,
anti-skid marks or is a
wooden surface
Check if the plug is
firmly connected to
power source; also
check whether
voltage is compatible
open the mobile
phone Settings,
find WeChat, click
on, open Bluetooth.
Clean the inside of
the bathtub properly.
If wooden tub is used,
please contact our
office to purchase the
exclusive bethtub.
Soft pad
will not
stick fast to
bathtub
Verify that someone
is online ( Bluetooth
display on the machine
control panel ), Just
disconnect or restart
the device.
Soft pad
will not
stick fast to
bathtub
