LITESPORT OWNERS MANUAL
20
Version 1.01
10.
Pull down on the top side wires. This will lower the compensator at the top of the
king post, allowing the king post to be lowered onto the sail.
11.
Fit the rear keel pad over the Bailey block assembly.
Picture 19
Fit the Bailey Block protector
12.
Fold and roll the sail parallel to the transversal battens.
Picture 20
Roll the sail
13.
Attach the sail ties loosely around glider, going from the wing tip to nose. Then
tighten the ties, moving from nose to wing tip. Adjust the sail such that the leading
edge Mylar inserts overlap smoothly with no kinks, as shown.
Picture 21
Neatly pack the glider and hold with ties
Make sure that the Dingle-dangle is rotated in-line with the keel for pack-up to
prevent serious damage to the sail and spars.
IMPORTANT
!
Summary of Contents for LITESPORT 4
