B.
Make
“
romfs
”
fold on new hard drive.
Caution: Use small letters only for the fold name,
“
romfs.
”
C.
Download the firmware files from a resource center, save them
into
“
romfs
”
, and turn off the switch.
D.
Turn on mPAVIO on the state of pressing
“
UPGRADE
”
button.
E.
Wait for a while until appearing the screen of
‘
firmware upgrade
”
F.
Press
“
Play
”
button if you want to progress, but press
“
Stop
”
button if you want to stop. The firmware
’
s upgrade should be
processing if you press
“
Play
”
button following massage.
G.
It is preparing to upgrade the firmware.
H.
The upgrade of firmware is in preparing.
I.
The upgrade of firmware is in process.
Caution: Do not turn off mPAVIO, or do not separate an adaptor
from mPAVIO until finishing the upgrade job.
J.
The screen of right will be appeared when the upgrade is
completed.
Caution: The upgrade of firmware is completed although the
massage is
“
Update (partly) failed!
”
.
K.
Turn off, and turn on, then you can use the function upgraded
Caution: Must Turn off the switch, and turn on when the upgrade is
completed.
2, Trouble Shooting
* Please check the following items if you think mPAVIO may have any
trouble.
01 Remote controller is not working.
list
↑
+ Please confirm that the battery is inserted in the case with correct polarity.
+ Please confirm to be an obstacle between the main body and the remote controller.
02 The screen is not clean.
list
↑
+ Are not you operating mPAVIO under the direct ray of light? Please avoid the direct ray of light, and
confirm the bright control.
